How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a unique set of steps to add another key. This requires an electronic handheld computer, referred to as Tech-2 which is to be used by the dealer. Then a new key and transponder need to be bought and then programmed to the car.
Make sure to rotate your keys in order to prevent one from wearing out quicker than another. This will also help to keep your keys in top condition.
Replacement Case
Unlike the classic Saab keys of old keys, the new key fobs are equipped with electronics which makes it hard to duplicate. This has made theft of cars a lot more complicated than it was 20 years ago. But, it has also made replacing lost keys an incredibly costly endeavor.
Saab 9-3 owners must have two working keys. It is expensive to replace a lost key because it requires replacing the CIM module, as well as reprogramming the locking cylinders. Dealers usually charge between $100-$200 for this.
There are ways to reduce these costly costs. Some parts dealers will search for the code from an old key (usually the same one that opens the doors and turns the ignition) and cut a new key blade out of metal for a fraction of the dealer's cost. The key, however, must be identical to the original in order to function in your vehicle.
Follow these steps to replace the case. You'll need a flathead and a lot of patience. With the screwdriver, break off the plastic and then remove the emergency key. Once you have the case opened, take out the electronics and place them into the new case. Make sure to insert the correct badge and key back into the case as well.
Replacement Battery
The replacement battery for the Saab 9-3 is a low-cost part that can be replaced easily and quickly. This YouTube tutorial for DIY Cyclone Cyd, a user on YouTube, explains how to replace the battery of the remote key fob in only four steps. This tutorial is compatible with any modern Saab key fob. However, the procedure may differ slightly.
The button is normally located near the Saab logo on the back of the fob. This button is usually located just below the Saab logo on the back of the fob. Then you will need an screwdriver with a flat head to insert into the small hole in this button. This should be enough to unlock the fob's case so that you can replace the battery.
After the new battery CR1632 is in place then you can reassemble your remote key fob. You can then program it to your car. The whole process should not be more than an hour. It is a very simple procedure that doesn't require any special equipment.
The process can be a bit more complex if you lose your key, but still possible. The dealer has to determine the VIN of the car and then order a new key blade and TWICE module that has the proper unique code. The dealer will then have to program the key using MDI, a brand new software tool.
Replacement Key Fob
The key fob is the part that locks and unlocks your car. It is equipped with a battery inside. The batteries last for a period of, and they will eventually expire. This is a regular issue that affects all cars, and the good news is that you can replace the batteries on most fobs, without replacing the whole case. Amazon sells replacement fobs that have all the electronic components installed. It is easy to open the case and replace the batteries. It is important to keep in mind that you will need to take out the emergency key first. you can accomplish this by inserting a small flathead screwdriver into the slot in the middle of the case. Use the screwdriver to move around the case until it will split open, making it easier to remove.
When you're ready to replace your keys, ensure you have spare keys, as this can reduce the total cost by a significant amount. If you have an additional key, you can request the dealer to cut the key and program it for your vehicle. This is much less expensive than purchasing a new fob.
If you don't have a spare car key, you can add another key to your car, however it requires a lot of research and effort. The cost for adding a second key is around a hundred dollars and it also requires the programming of the car's computer. This can be done by a professional, however it's a costly option for most owners.
Replacement Ignition
Contrary to the earlier Saab vehicles, the latest SAAB 9-3 models use a much more sophisticated alarm system that is based on a coded key. This means that when you lose your sole working key, acquiring another one can be very costly since the car needs to have a specific computer module added and it must also be specifically designed to accept a different key. Even a dealer can charge hundreds of dollars to program an additional key in the event that they are unable to complete the task.
If you've lost only one working key and a dealer is able to replace your car's computer (known as the CIM or SAAB TWICE) in order to make a replacement, and they will charge a premium for it. Instead, we can reprogram the EEPROM of your current car computer to prepare it for a new key, and save you over 50% of what you'll have to pay at a dealership.
If how to get a saab replacement key thekeylab.co.uk have owned a 9-3 from SAAB for a long time, you know that the ignition keys are not very durable. They can be extremely sticky, and the buttons are known to be removed from them occasionally which is why you should think about getting a replacement if yours isn't working properly. The good news is that replacing the ignition key isn't as complicated as it seems, and it can be done quickly with the right tools.